Fluke 190-202/UK Series II ScopeMeter Test Tool
The Fluke ScopeMeter 190-102 combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications. The 190-102 ScopeMeter is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot, and ScopeRecord roll paperless recorder modes and hands-free operation with Connect-and-View triggering, and much more.
Features:
- Deep Memory: 10,000 samples per channel waveform capture so you can zoom in on the details
- Dedicated 5000 Count digital multimeter
- Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
- ScopeRecord roll mode, capture waveform sample data for up to 48 hours
- TrendPlot, trend measurement readings for up to 22 days
- Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
- IP51 rated for dust and drip proof to withstand harsh environments
- Isolated USB ports for memory devices and PC connectivity
- Easy-access battery door to make it easy to swap batteries
- A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington lock
- Circuit voltage and current overloading
- Signal timing measurements and synchronization issues
- Test for harmonics, transients and loads at the three-phase power input
- Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
- Test PWM output for reflections and transients or voltage unbalance
Specifications:
| Battery Type |
Lithium-Ion |
| Battery Life |
BP290 2400 mAh Lithium-ion battery up to 4 hours included standard |
| Operating Temperature |
0 to 40 degree Celsius Including Batteries |
| 0 to 50 degree Celsius Excluding Batteries |
| Storage Temperature |
-20 to 60 degree Celsius |
| Operating Altitude |
Up to 2000 metre for CAT IV 600 V, CAT III 1000 volt |
| Up to 3000 metre for CAT III 600 V, CAT II 1000 volt |
| Maximum Resolution |
5000 counts |
| Measurements |
VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature Celsius or Fahrenheit (using optional converter) |
| Memory |
2 Channel |
| Screen + Setup: 30 |
| Recording: 10 |
| Display |
153 mm full color LCD with fast update rate |
| Bandwidth |
100 MHz |
| Number of Channels |
100 MHz: 2 channels |
| Real-Time Sample Rate |
1.25 GS/s |
| Inputs |
2 scope plus DMM input |
| Independently floating isolated inputs |
Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Timebase Range |
5 ns-2 min/div |
| Input Sensitivity |
2 mV-100 V/div |
| Trigger Types |
Connect-and-View, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger Source |
Any scope input channel, or external via DMM input |
| Glitch Capture |
8 ns |
| Scope Measurements |
Cursor: 7 |
| Automatic: 30 |
| Maximum Record Length |
ScopeRecord Mode: 30000 pts |
| Scope Mode: 10000 pts per input |
| Persistence |
Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform Compare |
Waveform reference with automatic Pass/Fail testing |
| Size |
270 x 190 x 70 mm |
| Weight |
2.2 kg |
Includes:
- Colour ScopeMeter
- 2 Channels
- DMM/Ext Input