Fluke 323 True-RMS Clamp Meter
The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes True-RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. Its designed to perform in the toughest environments and provide noise-free, reliable results, so you can trust it to help you confidently diagnose problems almost anywhere. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuse, and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 Amps in tight cable compartments.
Features:
- Features slim, ergonomic design for measuring in tight cable compartments
- Presents measurements on a large, easy-to-read display
- Hold function captures a reading on the display
- Features a CAT III 600 V, CAT IV 300 V safety rating
- Provides True-RMS AC voltage and current for accurate measurements on non-linear signals
- Measures resistance to 4 k? with continuity detection
Specifications:
| AC Current |
Range |
400 Amps |
| Accuracy |
2 percent ± 5 digits (45 Hz to 65 Hz)
2.5% ± 5 digits (65 Hz to 400 Hz) |
| AC Voltage |
Range |
600 volt |
| Accuracy |
1.5 percent ± 5 digits |
| DC Voltage |
Range |
600 volt |
| Accuracy |
1.0 percent ± 5 digits |
| Resistance |
Range |
400/4000 Ω |
| Accuracy |
1.0 percent ± 5 digits |
| Continuity |
≤ 70 Ω |
| AC Response |
True-RMS |
| Size |
207 x 75 x 34 mm |
| Maximum Wire Diameter |
30 mm (600 MCM) |
| Weight |
0.265 kg |
Includes:
- Test Leads
- User Manual
- Soft Case