Fluke 83V Average Responding Industrial Multimeter
Caulfield Industrial offers this Fluke digital multimeter to any technician in search of quality and highly accurate electrical current measurement tool. Like all fluke products, the Fluke 83V comes highly recommended by industry specialists who know its effectiveness, especially when productivity is on the line due to electrical problems. It comes with features designed to make it easy to detect problems, thereby helping you to fix any errors with ease. A low pass filter function makes it easy for you to precisely attain both the voltage and frequency on noisy machinery. For the detection of sporadic issues and transients being relayed at speeds of up to 250 microseconds (µs), you can use the peak capture function. Such features coupled with the fact that the Fluke digital multimeter is small and lightweight make this device very handy. You can also acquire temperature readings using a unique thermometer that has been built in for easier use.
Features:
- Optional magnetic hanger for easy set-up, and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
- Measure up to 10, 20 Amp for up to 30 seconds
- Resistance and continuity and diode test
- Minimum/Maximum and Average recording with Minimum/Maximum Alert to capture variations automatically
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bar graph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- "Classic" design with a new removable holster with built-in test lead and probe storage
- Measure AC current with an optional current clamp accessory
Specifications
| DC Voltage |
Maximum Voltage |
1000 volt |
| Accuracy |
±(0.1 percent + 1) |
| Maximum Resolution |
100 µV |
| AC Voltage |
Maximum Voltage |
1000 volt |
| Accuracy |
±(0.5 percent + 2) |
| Maximum Resolution |
0.1 mV |
| DC Current |
Maximum Amps |
10 Amps (20 Amps for 30 seconds maximum) |
| Amps Accuracy |
±(0.4 percent + 2) |
| Maximum Resolution |
0.01 mA |
| AC Current |
Maximum Amps |
10 Amps (20 Amps for 30 seconds maximum) |
| Amps Accuracy |
±(1.2 percent + 2) |
| Maximum Resolution |
0.1 µA |
| Resistance |
Maximum Resistance |
50 MΩ |
| Accuracy |
±(0.4 percent + 1) |
| Maximum Resolution |
0.1 Ω |
| Capacitance |
Maximum Capacitance |
9,999 µF |
| Accuracy |
±(1 percent + 2) |
| Maximum Resolution |
0.01 nF |
| Frequency |
Maximum Frequency |
200 kHz |
| Accuracy |
±(0.005 percent + 1) |
| Maximum Resolution |
0.01 Hz |
| Duty cycle |
Maximum Duty Cycle |
99.9 percent |
| Accuracy |
±(0.2 percent per khz + 0.1 percent) |
| Maximum Resolution |
0.1 percent |
| Conductance |
Maximum Conductance |
60.00 nS |
| Accuracy |
±(1.0 percent + 10) |
| Maximum Resolution |
0.01 nS |
| Diode |
Range |
3 volt |
| Resolution |
1 mV |
| Accuracy |
±(2 percent + 1) |
| Duty Cycle Range |
Accuracy |
within ±(0.2 percent per kHz + 0.1 percent) |
| Operating Temperature |
–20 to 55 degree Celsius |
| Storage Temperature |
–40 to +60 degree Celsius |
| Humidity (Without Condensation) |
0 – 90 percent (0 – 35 degree Celsius)
0 – 70 percent (35 – 55 degree Celsius) |
| Operating Altitude |
2000 metre |
| Display |
Digital |
6000 counts updates 4 per seconds |
| Analog |
32 segments, updates 40 per seconds |
| Frequency |
19,999 counts, updates 3 per seconds at > 10 Hz |
| Battery Life |
Alkaline 400 hours Typical |
| Shock |
1 Meter Drop per IEC 61010–1:2001 |
| Vibration |
Per MIL–PRF–28800 for a Class 2 instrument |
| Overvoltage Category |
EN 61010–1 to 1000 V CAT III, 600V CAT IV |
| Agency Approvals |
CSA, TÜV |
| Size |
201 x 98 x 52 mm (with Holster) |
| Weight |
0.355 kg |
Includes:
- 9-volt Alkaline Batteries
- TL75 - Test Leads
- AC175 - Alligator Clips
- Holster
Each and every Fluke digital multimeter is hand tested before rolling off the production line and being shipped off. Such meticulous quality control ensures that you get a high-quality product that will never fail you, especially when you need it the most. Get your Fluke digital multimeter online from Caulfield Industrial today.