FLUKE FC3000/EDA2 Wireless Digital Multimeter Kit

Fluke FC3000/EDA2 Wireless Digital Multimeter Kit

The Fluke 3000 FC gives you True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provides frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09 percent basic accuracy, a digital display showing up to three secondary measurements from remote modules, and a bright white backlight. With its precision, reliability, and ease of use, the Fluke 3000 FC Wireless Multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

Features:

• True-RMS AC voltage and current for accurate measurements on non-linear loads
• Large digit display with analog bar graph
• Display backlight for work in dark areas
• Records minimum and maximum values to aid in troubleshooting
• Free your hands with the magnetic hanger included in this combo kit
• Add your laptop and go from logging to analysis and diagnosis
• Record over time using the Fluke Connect wireless modules and monitor circuit load changes for an hour, a shift or a week
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data
• Perform for analysis with your PC and share the results using Fluke Cloud storage and ShareLive video call

Specifications:

Battery Type	AA
Battery Life	250 hours
Temperature	Operating Temperature	-10 to 50 degree Celsius
	Storage Temperature	-40 to 60 degree Celsius
Temperature Co-efficient	0.1 X (specified accuracy)/degree Celsius (< 18 degree Celsius or > 28 degree Celsius)
Relative Humidity	0 percent to 90 percent (0 to 35 degree Celsius) 0 to 75 percent (35 to 40 degree Celsius) 0 to 45 percent (40 to 50degree Celsius)
Altitude	Operating	2000 metre
	Storage	12000 metre
Maximum Voltage Between Any Terminal and Earth Ground	1000 V DC or AC RMS
Ω Fuse Protection From A Inputs	0.44 Amps (44/100 Amps, 440 mA), 1000 volt FAST Fuse, Fluke specified part only
Display (LCD)	Update rate	4 per seconds
	Volts, amps, ohms	6000 counts
	Frequency	10000 counts
Capacitance	1000 counts
minimum/Maximum Recording Accuracy
DC Functions	± 12 counts for changes > 350 mS in duration
AC Functions	± 40 counts for changes > 900 mS in duration
Input Characteristics
	Overload Protection	1100 volt RMS
	Input Impedance (nominal)	> 10 MΩ < 100 pF
	Common Mode Rejection Ratio (1 kΩ unbalance)	> 120 dB at DC, 50 Hz or 60 Hz
	Normal Mode Rejection	> 60 dB at 50 Hz or 60 Hz
	Overload Protection	1100 volt RMS
Input Impedance (Nominal)	> 10 MΩ < 100 pF
Common Mode Rejection Ratio (1 kΩ unbalance)	> 60 dB, DC to 60 Hz
Normal Mode Rejection	> 60 dB at 50 Hz or 60 Hz
	Overload Protection	1100 volt RMS
	Input Impedance (nominal)	> 10 MΩ < 100 pF
	Common Mode Rejection Ratio (1 kΩ unbalance)	> 120 dB at DC, 50 Hz or 60 Hz
	Normal Mode Rejection	> 60 dB at 50 Hz or 60 Hz
Open Circuit Test Voltage
	Overload Protection	1100 volt RMS
	Input Impedance (nominal)	< 2.7 volt DC
	Full Scale Voltage to 6 MΩ Full Scale Voltage 50 MΩ	< 0.7 volt DC < 0.9 volt DC
	Typical Short Circuit Current	< 350 mA
	Overload Protection	1100 volt RMS
	Input Impedance (nominal)	< 2.7 volt DC
	Full Scale Voltage to 6 MΩ Full Scale Voltage 50 MΩ	2.000 volt DC
	Typical Short Circuit Current	< 1.1 mA
AC Voltage
Range/Resolution		600.0/0.1 mV 6.000/0.001 volt 60.00/0.01 volt 600.0/ 0.1 volt 1000/1 volt
Accuracy	45 Hz to 500 Hz	1.0 percent + 3
	500 Hz to 1 kHz	2.0 percent + 3
DC Voltage, Continuity, Resistance, Diode Test and Capacitance
mV	Range/Resolution	600.0/0.1 mV
	Accuracy	0.09 percent + 2
V	Range/Resolution	6.000/ 0.001 volt 60.00/0.01 volt 600.0/0.1 volt 1000/ 1 volt
	Accuracy	0.09 percent + 2 0.15 percent + 2
)))	Range/Resolution	600/1 Ω
	Accuracy	Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer
Ω	Range/Resolution	600.0/0.1 Ω 6.000/0.001 kΩ 60.00/0.01 kΩ 60.00/0.1 kΩ 600.0/0.001 MΩ 50.00/0.01 MΩ
	Accuracy	0.5 percent + 2 0.5 percent + 1 1.5 percent + 3
Diode test	Range/Resolution	2.000/0.001 volt
	Accuracy	1 percent + 2
µF	Range/Resolution	1000/1 nF 10.00/0.01 μF 100.0/0.1 μF 9999 μF1 / 1 μF
	Accuracy	1.2 percent + 2 10 percent typical
AC and DC Current
mA AC (45 Hz to 1 kHz)	Range/Resolution	60.00/0.01 mA 400.0 mA3 / 0.1 mA
	Accuracy	1.5 percent + 3
mA DC	Range/Resolution	60.00/0.01 mA 400.0/0.1 mA
	Accuracy	0.5 percent + 3
Frequency
Range/Resolution	99.99/0.01 Hz 999.9/0.1 Hz 9.999/0.001 kHz 99.99/0.01 kHz
Accuracy	0.1 percent + 1
Size	47.5 x 93 x 207 mm
Weight	340 g

Includes:

• 3000 FC True-RMD Digital Multimeter with Backlight
• TL910 Electronic Test Probes
• TL224 Silicone Test Leads
• AC280 Heavy Duty Hook Clips
• ToolPak Magnetic Meter Hanger
• Batteries
• User Manual CD
• Soft Carry Case

Technical File: