FLUKE FEV300/TY2 Test Adapter EV Charging with TYPE 2 Plug, INTL,5347987

€959.00 Ex. VAT


Code Type No. Quantity Price Ex. VAT
E10817 5347987 €959.00
Add to Basket
Delivery Info

Please allow 1 - 2 Business Days for Delivery

Free delivery on all orders over €49.99 + VAT, Click here for more information 

Returns Policy

Easy Returns via Store, Post or Courier

Caulfield Industrial  are happy to accept items returned to us within 28 days of purchase and in this case we offer you an exchange or a full refund once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of Caulfields and may be refunded as a credit against a future purchase. All items must be returned to Caulfields in the same condition in which they were shipped and in a saleable condition. Caulfield Industrial reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.

Downloads
Click to view complete product details

FLUKE 5347987 FLK-FEV300/TY2 Test Adapter EV Charging with TYPE 2 Plug, INTL

The FEV300 electric vehicle charging station test adapter simulates the presence of an electrical vehicle, allowing the user to conduct safety and functionality tests in combination with appropriate test instruments such as an installation multifuntion tester, digital multimeter or oscilloscope. Use the FEV300 for station installations and to verify the station is working properly after install, during periodic maintenance, or troubleshooting an if the station is not delivering the appropriate charge in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.

Perform a variety of tests including ground fault checks, insulation of wires, voltage and duty cycle to see max current available for charging all in one adapter. The FEV300 is suitable for AC charging stations with charging mode 3 and connectors type 2 and type 1.

Features
  • EV-adapters for type 2 and type 1 connectors
  • PE Protective Earth Pre-Test: verifies there is no presence of dangerous voltage at the ground terminal.
  • CP Control Pilot Simulation: simulates communication and variable charging rate control vehicle signals that allow transfer from the station to the vehicle.
  • PE and CP Error: simulates Control Pilot (CP) signal short-circuited to Protective Earth (PE) and an interruption of PE conductor.
  • Proximity Pilot (PP): With PP State rotary switch the adapter can simulate various current capabilities of charging cables.
  • Separate phase indication by three LED lamps: easy check if voltage is present.
  • L1, L2, L3, N and PE measuring terminals: five 4 mm safety sockets for connection to Installation Testers (for example, Fluke 166x series). This allows safety measurements via the measuring terminals like: earth bond- insulation, loop/line impedance, RCD trip test.Terminals for CP signal output to check communication between adapter and charging station: use a Fluke ScopeMeter® to measure voltage levels of CP signal and obtain duty cycle for the signal defining the charging current.
  • IP 54 rating: Limited dust ingress and water splashing protection.
Specifications
  • Input Voltage: Up to 250 V (single phase system) / up to 480 V (three phase system), 50/60 Hz, max 10 A
  • EV connector (Type 2): AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
  • Operating temperature: -20 °C to 40 °C (-4 °F to 104 °F)
  • Storage temperature: -20 °C to 50 °C (-4 °F to 122 °F)
  • Operating humidity range: 10 % to 85 % relative humidity non-condensing
  • Storage relative humidity:  0 % to 85 % non-condensing
  • Dimensions (H × W × D): Approx. 8.66 x 4.33 x 1.77 in (220 x 110 × 45 mm) without cable assembly
  • Weight: Approx 2Kg
  • Safety Standards: IEC 61010-1, Pollution Degree 2, IEC 61010-2-030, IEC/EN 61851-1
  • Measurement category: CAT II 300
  • IP protection class: IP54
Main Applications
  • Safety testing of charging stations
  • Functional testing of charging stations
  • Troubleshooting/repair of charging stations
Supplied with
  • FEV300/BASIC Test Adapter
  • FEV300-CON-TY2
  • Soft Carrying Bag
Close

POP-IN HTML goes here

Close

Your Basket

Your basket is currently empty