TOMKAT S2 Cable Avoidance Tool & Pipe Locator
The TOMKAT s2 is our base level locator using sound only to locate
The PACT TOMKAT S2 Pipe and Cable Locator / CAT - Cable Avoidance Tool alerts the user to the presence of cables and pipes via an audible indication. The PACT TOMKAT S2 Pipe and Cable Locator’s sound alert is outputted from a removable, waterproof speaker allowing the user to place the speaker at the distance most conducive to hearing the alarm.
The PACT TOMKAT S2 Pipe and Cable Locator feature three modes of operation allowing the user to tailor the instrument to the application:
- Power Mode: locate live cables carrying a detectable signal
- Radio Mode: locate re-radiated signals
- Generator Mode: locate conductors carrying a signal supplied by the signal generator
Further to this, the PACT TOMKAT S2 Cable Avoidance Tool also includes a sensitivity control for identifying the precise location of buried conductors.
This instrument has a location accuracy of ± 10% of the depth. Depending on the mode the PACT TOMKAT S2 CAT is placed in and the condition of the ground, this instrument can detect cables located up to three metres beneath the earth.
Features
- Alerts the user to the presence of cables and pipes via an audible indication
- The sound alert is outputted via a removable, waterproof speaker
- The speaker can be placed or held in a position most convenient to the user
- No display
- Three modes
- Power Mode: locate live cables carrying a detectable signal
- Radio Mode: locate re-radiated signals
- Generator Mode: locate conductors carrying a signal supplied by the signal generator
- Sensitivity control for locating the precise location of buried conductors
- Location accuracy: ±10% of the depth
- Can locate cables/ pipes up to three metres below the ground depending on the mode and the condition of the ground (see the table above)
- Optimised for resilience and suitability for rugged environments
- Constructed from high-impact ABS
- IP54
- CE tested
- A durable, precise and versatile instrument
- Suitable for locating a variety of pipes and cables in a number of challenging environments
- ***** Please note this model does not offer depth indication****
Specifications
- On/Off Switch: Micro switch
- Power Mode: Used to locate live cables carrying a detectable signal
- Radio Mode: Used to locate re-radiated radio signals
- Generator Mode: Used to locate conductors carrying a signal supplied by the signal generator
- Sensitivity Control: Used to pinpoint the location of buried conductors
- Visual Display: A digital LED visual display shows a bar, mode selected & battery condition.
- Speaker Assembly: An audible signal output via the waterproof speaker assembly
- Batteries: 8 x AA alkaline supplied fitted typical battery life 50 hours intermittent use.
- Operating Temperature: -20C to + 50C
- Location Accuracy: + or – 10% of depth
- Location Depth (typically)
- Power mode 3 meters in good conditions 2 meters in poor conditions
- Radio mode 2 meters in good conditions 1 meter in poor conditions
- Generator mode 3 meters in good conditions 2 meters in poor conditions
- Good Conditions: In P.A.C.T.'s opinion, good conditions imply the ground is loose and damp
- Poor Conditions: In P.A.C.T.'s opinion, good conditions imply the ground is loose and damp: Frequency
- Frequency:
- Batteries: 8x AA Alkaline ~ 50hours intermittent use
- Operating Temperature: -20C to 50C
- Compatibility: Will work with signal generators transmitting a 33khz signal
- Location Accuracy: +/- 10% of Depth
- Frequency: Power Mode: (50 -3khz); Radio Mode: (15 – 30khz); Generator Mode: (33khz)
- Moulded from high impact ABS weatherproof to IP54 CE Tested
- Dimensions: 730mm x 245mm x 65mm
- Weight: 2.1kg
Supplied with
- PACT TOMKAT S2 Pipe and Cable Locator / CAT - Cable Avoidance Tool – No Display
- 8x AA Batteries - Fitted
SEE OPTIONAL TRANSMITTERS K15103 and tools K15241, K15240