Ambersil 30303 400ml High-Temperature Copper Anti-Seize Paste
Ambersil Copper Paste is a high-temperature anti-seize lubricant. A soft, copper-coloured paste, based on micronised copper powder and synergistic anti-oxidant, anti-corrosion and anti-wear additives suspended in a premium grade stable oil. It is an effective anti-seize formulation, preventing metal-to-metal contact, seizing, galling, and fretting corrosion.
Features:
- Lead-free and nickel free
- Ensures accurate assembly
- Resistant to hot and cold water
- High pressure and high-temperature resistance
- Excellent sealing even in corrosive atmospheres
- Threaded parts remain in good condition and can be re-used
- Good corrosion protection even in highly corrosive environments
- Does not migrate, even when heated to 370 degree Celsius
- Reduces friction and wear, even when the base oil has already evaporated
- Separating film ensures favourable release behaviour of the threaded connections
- True copper paste exhibits much higher copper content than equivalent copper greases
- The aerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellant
Applications:
- Wheel Bolts
- Guides for brakes
- Bushings, fittings
- Flanges, flange seal
- Bolts, nuts and pins
- Splines
- Spark plugs
- Sliding sleeves/shafts
- Press fits
- Brake adjusters
- Exhaust screw connections
- Linkages
- Pipeline connections
- To absorb disk brake noise
- Screw connections on hydraulic equipment
Specifications:
- Volume: 400 ml
- Operational Temperature Range: -30 to +1100 degree Celsius
Aerosol:
- Flash Point (Open Cup): < 0 degree Celsius
- Boiling Range (Solvent): 60-95 degree Celsius
- Vapour Density (Air=1): 3
- Specific Gravity (at 20 degree Celsius): 0.81
Dry Film:
- Specific Gravity (at 20 degree Celsius): 0.99
- Flash Point (Open Cup): > 200 degree Celsius
- Low-Temperature Stability: -30 degree Celsius
- Temperature Resistance Lubrication: 300 degree Celsius
- Temperature Resistance Anti-Seize: 1100 degree Celsius
- Hot Water Resistance: 1
- Four-Ball Wear: 0.5 mm