DCG412 - ANGLE GRINDER FEATURES:
- Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity
- Low profile jam pot gear case improves gear durability and ergonomics
- Intelligent trigger and lock-off switch for enhanced work safety and control
- Keyless guard for enhanced application versatility
- Two position side handle offers greater comfort and control
- Quick change wheel release allows quick and easy wheel removal
DCG412 - ANGLE GRINDER SPECIFICATIONS:
- Disc Diameter: 125 mm
- No Load Speed: 7000 rpm
- Spindle Thread: M14
- Length: 400 mm
- Height: 125 mm
- Weight: 2.2 kg
DCD995 - HAMMER DRILL FEATURES:
- All metal nitro-carburized chuck prolongs life as it is stronger and rust resistant
- Carbide inserts improve bit gripping strength and helps to minimize dropped bit frustrations
- 3-speed gearbox for a greater range of applications
- Larger brushless motor than previous model gives 34 percent increase in power
DCD995 - HAMMER DRILL SPECIFICATIONS:
- Power Output: 830 watt
- Chuck Capacity: 1.5-13 mm
- No Load Speed: 0-500/1500/2250 rpm
- Beats Per Minute: 0-8600/25500/38250 bpm
- Maximum Torque (Hard/Soft): 95/66 Nm
- Maximum Drilling Capacity (Wood/Metal/Masonry): 55/15/13 mm
- Sound Pressure Level: 97 dB(A)
- Sound Pressure Level Uncertainty: 3 dB(A)
- Sound Power Level: 108 dB(A)
- Sound Power Level Uncertainty: 3 dB(A)
- Hand/Arm Vibration (Drilling Metal): 2.5 m/s²
- Vibration Uncertainty (K1/K2/K3): 1.5/3.9/1.5 m/s²
- Hand/Arm Vibration (Drilling Concrete/Screwdriving): 15/2.5 m/s²
- Length: 213 mm
- Width: 70 mm
- Height: 208 mm
- Weight: 1.6 kg
DCF886 - IMPACT DRIVER FEATURES:
- High power Brushless motor outputting up to 205 Nm of torque ensures heavy applications are completed quickly
- Application control is achieved through 3 motor speeds and torque settings including PrecisionDrive
- PrecisionDrive mode offers additional control in screwdriving applications to avoid material and fastener damage
- Super lightweight and compact the tool is very comfortable to use and fits in small spaces
DCF886 - IMPACT DRIVER SPECIFICATIONS:
- Power Output: 400 watt
- Maximum Torque: 205 Nm
- No Load Speed: 0-1000/2800/3250 rpm
- Impacts Per Minute: 0-3800 ipm
- Bit Holder: 6.35 mm
- Hand/Arm Vibration (Impact): 22 m/s²
- Uncertainty K 1 (Vibration): 2.1 m/s²
- Sound Pressure Level: 96 dB(A)
- Sound Pressure Level Uncertainty: 3 dB(A)
- Sound Power Level: 107 dB(A)
- Sound Power Level Uncertainty: 3 dB(A)
- Length: 134 mm
- Height: 195 mm
- Weight: 0.94 kg
DCS391 - CIRCULAR SAW FEATURES:
- Ergonomic handle set with rubber overmold to optimise end-user comfort
- Extremely durable tool design, including a cast magnesium base for repetitive, accurate cuts
- Intelligent trigger allowing total control over all applications
- Keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility
- Spindle lock for quick and easy blade change
- Lock off switch and electronic motor brake for additional control and work safety
- Ultra-thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
DCS391 - CIRCULAR SAW SPECIFICATIONS:
- Blade Diameter: 165 mm
- Power Output: 460 watt
- Bevel Capacity: 50 degrees
- Maximum Depth of Cut (90/45 degree): 55/42.1 mm
- Length: 360 mm
- Height: 240 mm
- Weight: 3.21 kg
DCS331 - JIGSAW FEATURES:
- Powerful and Highly efficient DeWALT PM47 fan-cooled motor with replaceable brushes. Delivers fast cutting action up to 3000 strokes per minute maximizing user productivity
- Intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety
- Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions
- Quick and easy patented keyless blade change system, accepts T-shank blades
- Patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation
- 3-position pendulum action controls the aggressiveness or smoothness of cuts
- Rubber coated grip to reduce surface vibration and user fatigue
DCS331 - JIGSAW SPECIFICATIONS:
- Stroke Length: 26 mm
- Levels of Pendulum Stroke: 4
- Strokes at No Load: 0-3000/min
- Maximum Depth (Wood/Metal): 135/10 mm
- Bevel Capacity: 45 degree
- Length: 305 mm
- Height: 215 mm
- Weight: 2.4 kg
DCL040 - TORCH FEATURES:
- Compact, lightweight design with impact resistant housing
- LED Bulb producing 110 Lumen output (10,000 Hour Life) with a 2 Zone light pattern
- Flashlight head pivots more than 90 degrees vertically with ratchet lock
- Flashlight includes an integrated hook for hanging and can be used free standing
- Improved ergonomic design and rubber grip increase comfort
Caulfield Industrial is Irelands’ largest online industrial supplier and stocks a full range of DeWALT Power Tools and Accessories providing Next Day Delivery throughout Ireland on all stocked items.