Electrolube 013152 200ml 2X Contact Treatment Oil
Electrolube SOB (2X Oil) was developed as an extension of the No 2 Range (SGA and SOA) with increased plastics compatibility. This product development was necessary due to the use of thermoplastics in the electronics and automotive industries. SOB will significantly increase contact performance and lifetime.
Features:
- Improves contact performance by increasing effective contact area
- Enhanced Plastics Compatibility: Suitable for a range of plastics and rubbers (testing advised)
- Highly stable synthetic material, fully inhibited against oxidisation and copper corrosion
- Excellent penetration and cooling properties; prevents arcing, thus reduces contact wear
- Developed due to the use of thermoplastics in the electronics and automotive industries
- Will significantly increase contact performance and lifetime by improving contact surface
Specifications:
- Volume: 200 ml
- Density: 1.002 (g/ml)
- Temperature Range: -40 to 130 degree Celsius
- Vapour Pressure (Torr at 20 degree Celsius): 0.001
- Evaporation Weight Loss (percent 72 hours at 100 degree Celsius): 0.90
- Ash Range percent: < 0.02
- Neutralisation Value: 0.26 (mg KOH/g)
- Water Content: 49 ppm
- Viscosity at 40 degree Celsius (Kinematic Viscosity): 225 cSt
- Viscosity at 100 degree Celsius (Kinematic Viscosity): 37 cSt
- Viscosity Index: 220
- Pour Point (at 97 degree Celsius): -37
- Flash Point (at 92 degree Celsius): 210