Fluke 113 True-RMS Utility Digital Multimeter
Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic testing. It is easy to-use and has the features needed to repair most electrical problems. Using the Fluke VChek LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Minimum/Maximum function lets you record signal fluctuations. The Fluke 113 digital Multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.
Features:
- VChek LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True-RMS for accurate AC measurements on non-linear loads
- A large backlit display allows for easy visibility in low-lit areas
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Integral holster with probe holders for easy storage
- Auto and Manual ranging for added user functionality
- Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
- The optional TPAK magnetic hanger allows the user hands-free flexibility
- For utility worker, linesman, electricians, technicians, basic electrical testing
Specifications:
| Battery Voltage |
9 volt |
| Battery Type |
Alkaline |
| Battery Life |
300 hours Typical, without Backlight |
| Maximum Voltage between Any Terminal and Earth Ground |
600 volt |
| Display |
3 3/4-digits, 6000 counts, updates 4/second |
| Operating Temperature |
-10 to 50 degree Celsius |
| Storage Temperature |
-40 to 60 degree Celsius |
| Temperature Co-Efficient |
0.1 x (Specified Accuracy) / Celsius (< 18 degree Celsius or > 28 degree Celsius) |
| Operating Altitude |
2000 metre |
| Storage Altitude |
10000 metre |
| Relative Humidity |
95 percent to 30 degree Celsius
75 percent to 40 degree Celsius
45 percent to 50 degree Celsius |
| VCHEK1 2 3 |
Range |
6.000/60.00/600.0 volt |
| Resolution |
0.001/0.01/0.1 volt |
| Accuracy |
DC, 45 to 500 Hz: 2.0 percent + 3
500 Hz to 1 kHz: 4.0 percent + 3 |
| Diode Test4 |
Range |
2.000 volt |
| Resolution |
0.001 volt |
| Accuracy |
2.0 percent + 3 |
| Continuity4 |
Accuracy |
Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer |
| Ω4 |
Range |
600.0 Ω/6.000 kΩ/60.00 kΩ |
| Resolution |
0.1 Ω/0.001 kΩ/0.01 kΩ |
| Accuracy |
0.9 percent + 2 / 0.9 percent + 1 / 0.9 percent + 1 |
| Capacitance4 |
Range |
1000 nF/10.00 μF/100.0 μF/9999 μF |
| Resolution |
1 nF/0.01 μF/0.1 μF/ 1 μF |
| Accuracy |
1.9 percent + 2
100 μF - 1000 μF: 1.9 percent + 2
1000 μF: 5 percent + 20 |
| Vibration |
Per MIL-PRF-28800 for Class 2 Instrument |
| VCHEK |
Input Impedance (Nominal) |
~3 kΩ < 300 pF |
| VCHEK |
Common Mode Rejection Ratio
(1 kΩ unbalanced) |
> 60 dB at DC, 50 or 60 Hz |
| Ω |
Open Circuit Test Voltage |
< 2.7 VDC |
| Full Scale Voltage |
< 0.7 VDC |
| Diode Test |
Open Circuit Test Voltage |
2.7 VDC |
| Full Scale Voltage |
2.000 VDC |
| Ω |
Short Circuit Current |
< 350 μA |
| Diode Test |
Short Circuit Current |
< 1.0 mA |
| Size (H x W x L) |
167.1 x 85.1 x 46.0 mm |
| Weight |
0.404 kg |
Includes:
- 9 volt Battery
- Fluke TL75 Test Leads
- Holster
- Users Manual
Caulfield Industrial is Irelands’ largest online industrial supplier and stocks a full range of Fluke Measuring and Accessories providing Next Day Delivery throughout Ireland on all stocked items.