Fluke 1AC II VoltAlert Voltage Detector
The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's a voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Features:
- Voltbeat technology and continuous self-test-so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 volt for added protection
- On and Off button
- Audible and silent mode
Specifications:
| Battery Type | AAA Alkaline |
| Battery Life | Typical Battery life of greater than 1 year |
| Operating Temperature | -10 to 50 degree Celsius |
| Operating Humidity Range | 0 to 95 percent (0 to 30 degree Celsius) |
| 0 to 75 percent (30 to 40 degree Celsius) |
| 0 to 45 percent (40 to 55 degree Celsius) |
| Operating Altitude | 3000 metre |
| Cleaning | Clean with Damp Cloth |
| Operating Principles | Senses the steady state electrostatic ?eld produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage Sensing Ranges | Nominally, 200 to 1000 volt AC |
| Detector Tip Style | Flat-Tip |
| Light Source | One High-Intensity Red LED |
| Agency Approvals | c CSA us, CE, C-Tick |
| Safety Rating | 1000 volt, CAT IV |