FLUKE 355 True-RMS Clamp Meter

€1,062.00 Ex. VAT

Code	Type No.	Quantity	Price Ex. VAT
K10011	355		€1,062.00

Add to Basket

Delivery Info

Please allow 1 - 2 Business Days for Delivery

Free delivery on all orders over €49.99 + VAT, Click here for more information

Returns Policy

Easy Returns via Store, Post or Courier

Caulfield Industrial are happy to accept items returned to us within 28 days of purchase and in this case we offer you an exchange or a full refund once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of Caulfields and may be refunded as a credit against a future purchase. All items must be returned to Caulfields in the same condition in which they were shipped and in a saleable condition. Caulfield Industrial reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.

Downloads

355.PDF (476 KB)

Back to results page

Click to view complete product details

Fluke 355 True-RMS Clamp Meter

Fluke confidently take reliable readings with the True RMS, Fluke 355 digital clamp meter the tool of choice for high current clamp-on amp meter measurement up to 2000 Amps. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.

Features:

The large 58 mm jaw capacity is suitable for large or multiple conductors
In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
Resistance to 400 K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter
Accurately measure frequency up to 1 kHz for optimum troubleshooting
Quickly analyze readings using the Minimum, Maximum and Average functions
A large backlit display allows for easy visibility in low-lit areas
Use the display hold feature to capture readings even when the display cannot be viewed
Use the low-pass filter to smooth out noisy loads and stabilize readings

Specifications:

Battery Type	AA
Battery Life (With Typical Usage, backlight off)	100 hours
Operating Temperature	0 to 50 degree Celsius
Storage Temperature	-20 to 60 degree Celsius
Operating Humidity	0 to 95 percent (Non-Condensing)
Operating Altitude	2000 metre
Storage Altitude	10000 metre
Drop Test Requirements	1 metre
Temperature Coefficients	Current	0.1 percent of reading per degree Celsius outside 22 to 24 degree Celsius
Temperature Coefficients	Voltage	0.1 percent of reading per degree Celsius outside 22 to 24 degree Celsius
Test Leads	Rated to 1000 volt
Jaw Size	58 mm
Current Measurement DC and AC 10 to 100 Hz	Range	40/400/2000 Amps, 1400 AC RMS
	Resolution	10 mA/100 mA/ 1 Amps
	Accuracy	A: 1.5 percent rdg + 15 digits A: 1.5 percent rdg + 5 digits
	Trigger Level for Inrush	0.50/5.0/5 Amps
	Trigger Level for Hz Filter Off	2.50/2.5/8 Amps
	Trigger Level for Hz Filter On	0.50/2.5/8 Amps
Crest Factor (50/60 Hz)	Range	40/400/2000 Amps, 1400 AC RMS
Crest Factor (50/60 Hz)	Crest Factor	2 at 33 Amps, 2.4 at 27 Amps 2 at 330 Amps, 2.4 at 270 Amps 2 at 1000 Amps, 2.4 at 833 Amps
Current Measurement AC 100.1 Hz to 1 kHz	Range	40/400/2000 Amps, 1400 AC RMS
	Resolution	10/100 mA/1 Amps
	Accuracy	10 A: 3.5 percent rdg + 15 digits 10 A: 3.5 percent rdg + 5 digits
	Trigger Level for Inrush	0.50/5.0/5 Amps
	Trigger Level for Hz Filter Off	2.50/2.5/8 Amps
	Trigger Level for Hz Filter On	0.50/2.5/8 Amps
Voltage Measurement DC and AC 10 Hz to 100 Hz (600 volt and 1000 volt ranges have 10 percent over range to 660 volt and 1100 volt respectively)	Range	4/40/400/600 volt AC rms/1000 VDC
	Resolution	1/10/100mV/ 1 volt
	Accuracy	1 percent rdg + 10 digits 1 percent rdg + 5 digits
	Trigger Level for Hz Filter Off	0.25/6 volt
	Trigger Level for Hz Filter On	0.25/6 volt
Voltage Measurement AC 100.1 Hz to 1 kHz (600 volt and 1000 volt ranges have 10 percent over range to 660 volt and 1100 volt respectively)	Range	4/40/400/600 volt AC RMS
	Resolution	1/10/100/1 volt
	Accuracy	3 percent rdg + 10 digits 3 percent rdg + 5 digits
	Trigger Level for Hz Filter Off	0.050/0.25/ 6 volt
	Trigger Level for Hz Filter On	0.050/0.25/6 volt
Ohms Measurement	Range	4/40/400 kΩ
	Resolution	0.1/1/10/100 Ω
	Accuracy	1.5 percent + 5 digits
Continuity Beeper	On at ≤ 30 Ω Off at ≥ 100 Ω
Frequency Measurement	Measurement Range	5.0 Hz to 1 kHz
	Resolution	0.1 Hz (15 to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
	Accuracy – 5.0 Hz to 100 Hz	0.2 percent + 2 counts
	Accuracy – 100.1 Hz to 1 kHz	0.5 percent + 5 counts
	Trigger Level	Refer to Current and Voltage Tables
Size	300 x 98 x 52 mm
Weight	0.814 kg

Includes:

6 x AA Batteries
Silicone Rubber Test Leads
Test Probes
Alligator Clips
User Manual
Soft Carry Case

Caulfield Industrial is Irelands’ largest online industrial supplier and stocks a full range of Fluke Measuring and Accessories providing Next Day Delivery throughout Ireland on all stocked items.

Technical File: