Fluke 87V Industrial Digital Multimeter
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high energy, and high altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS. Use the 87V to measure AC current up to 10 Amps directly, or use an optional clamp for high current measurements.frequency to 200 kHz, plus percent duty cycle, resistance, continuity and diode test. And it includes a built-in thermometer so you can take temperature readings without having to carry a separate instrument, and more. Plus, with its bright, two-level backlit display you’ll be able to see the results better in dim light.
Features:
- Easy access door for fast battery changes without breaking the calibration seal
- Removable holster with built-in test lead and probe storage for convenience
- Audible Input Alert warning against wrong use of input jacks
- Provides peak capture and minimum, Maximum And Average recording to capture
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bar graph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Provides 10,000 µF capacitance range for components and motor caps
- Offers relative mode to remove test lead interference from low ohms measurements
- Features auto and manual ranging for maximum flexibility
- Includes Touch Hold to capture stable readings of noisy signals
Specifications:
| Battery Type |
Alkaline |
| Battery Life |
400 hours |
| Operating Temperature |
–20 to 55 degree Celsius |
| Storage Temperature |
–40 to 60 Celsius |
| Humidity (Without Condensation) |
0 – 90 percent (0 – 35 degree Celsius)
0 – 70 percent (35 – 55 degree Celsius) |
| Operating Altitude |
2000 metre |
| Display |
Digital |
6000 counts updates 4 per seconds
19999 counts in high–resolution mode |
| Analog |
32 segments, updates 40 per seconds |
| Frequency |
19999 counts, updates 3 per seconds at > 10 Hz |
| DC Voltage |
Maximum voltage |
1000 volt |
| Accuracy |
±(0.05 percent + 1) |
| Maximum Resolution |
10 µV |
| AC Voltage |
Maximum Voltage |
1000 volt |
| Accuracy |
±(0.7 percent + 2) True RMS |
| AC Bandwidth |
20 kHz with Low Pass Filter; 3 db at 1 kHz |
| Maximum Resolution |
0.1 mV |
| DC Current |
Maximum Amps |
10 Amps (20 Amps for 30 seconds maximum) |
| Amps Accuracy |
±(0.2 percent + 2) |
| Maximum Resolution |
0.01 µA |
| AC Current |
Maximum Amps |
10 Amps (20 Amps for 30 seconds maximum) |
| Amps Accuracy |
±(1.0 percent + 2) True RMS |
| Maximum Resolution |
0.1 µA |
| Resistance |
Maximum Resistance |
50 MΩ |
| Accuracy |
±(0.2 percent + 1) |
| Maximum Resolution |
0.1 Ω |
| Capacitance |
Maximum Capacitance |
9,999 µF |
| Accuracy |
±(1 percent + 2) |
| Maximum Resolution |
0.01 nF |
| Frequency |
Maximum Frequency |
200 kHz |
| Accuracy |
±(0.005 percent + 1) |
| Maximum Rresolution |
0.01 Hz |
| Duty Cycle |
Maximum Duty Cycle |
99.9 percent |
| Accuracy |
±(0.2 percent per khz + 0.1 percent) |
| Maximum Resolution |
0.1 percent |
| Temperature Measurement |
–200.0 degree Celsius – 1090 degree Celsius
excluding probe |
| 80 BK Temperature Probe |
–40.0-260 degree Celsius, 2.2 degree Celsius or 2 percent whichever is greater |
| Conductance |
Maximum Conductance |
60.00 nS |
| Accuracy |
±(1.0 percent + 10) |
| Maximum Resolution |
0.01 nS |
| Diode |
Range |
3 volt |
| Resolution |
1 mV |
| Accuracy |
±(2 percent + 1) |
| Duty Cycle Range |
Accuracy |
Within ±(0.2 percent per kHz + 0.1 percent) |
| Size |
201 x 98 x 52 mm (with holster) |
| Weight |
0.355 kg
0.624 kg – with holster |
Includes:
- 9-volt Battery
- Temperature Probe
- Alligator Clips
- Test Leads
- Holster
For an effortless and effective way to measure voltage and current, get the Fluke Digital Multimeter 87V from Caulfield Industrial today.