Fluke T6-600/62 Max+/1 1AC II Multimeter Kit
Fluke T6-600/62 Max+/1 1AC II Multimeter is available to buy online at Caulfield Industrial.
T6-600 Electrical Tester Features:
- FieldSense technology for AC voltage, current and frequency measurement without making electrical contact to live voltage
- Simultaneous voltage and current display-shows all power supply measurements at a glance for efficient troubleshooting
- Hold button temporarily freezes the reading for easy viewing
- Easy to read display with backlight
- Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
- Wearing gloves or insulated footwear
- Standing on an insulated ladder
- Additional ground contact is required for the application
- Measure voltage to 1000 volt AC through the open fork, without test leads
- No need to open covers or remove wire nuts
- Simultaneously measure voltage and current
- Actually, measure ac voltage and current values without test leads
T6-600 Electrical Tester Specifications:
Battery Type |
AA |
Battery Life |
360 hours continuous, Typical: 200 hours using FieldSense |
Jaw Opening |
17.8 mm |
Temperature |
Operating |
-10 to 50 degree Celsius |
Storage |
-30 to 60 degree Celsius |
Altitude |
Operating |
2000 metre |
Storage |
10000 metre |
Relative Humidity |
0to 90 percent, 5 to 30 degree Celsius |
0 to 75 percent, 30 to 40 degree Celsius |
0 to 45 percent, 40 to 50 degree Celsius |
Function |
Requires Test Leads |
Range |
Resolution |
Accuracy |
FieldSense AC Voltage True-RMS |
No |
600 volt |
1 volt |
± (3 percent + 3 counts) 45 to 66 Hz |
FieldSense AC Current True-RMS |
No |
200 Amps |
0.1 Amps |
± (3 percent + 3 counts) 45 to 66 Hz |
FieldSense Frequency (Hz) |
No |
|
1 Hz |
± (1 percent + 2 counts) |
Volts AC True-RMS |
Yes |
600 volt |
1 volt |
± (1.5 percent + 2 counts) 45 to 66 Hz |
DC Voltage |
Yes |
600 volt |
1 volt |
± (1 percent + 2 counts) |
Resistance |
Yes |
2000 Ω |
1 Ω |
± (1 percent + 2 counts) |
Yes |
20.00 kΩ |
0.01 kΩ |
Yes |
100.0 kΩ |
0.1 kΩ |
Size |
61.1 x 259.3 x 43.8 mm |
Weight |
0.35 kg |
62 Max+ Infrared Laser Thermometer Features:
- High and low alarms for rapid detection of temperatures outside the limits
- Powered by a single, standard AA battery
- Offers small and lightweight form factor to clip comfortably to your tool belt or belt loop or easily fit in your toolbox
- Features a large, backlit display to make data easier to read even in dark areas
- Displays Minimum/Maximum/Average/Different: The Minimum, Maximum or Average Temperature, or the Difference between two measurements
- Offers single laser targeting for accurate and repeatable measurements
62 Max+ Infrared Laser Thermometer Specifications:
Battery Type |
AA |
Battery Life |
8 hours with Laser and Backlight On |
Operating Temperature |
0 to 50 degree Celsius |
Storage Temperature |
-20 to 60 degree Celsius, (without battery) |
Operating Humidity |
10 to 90 percent RH Non-Condensing at 30 degree Celsius |
Operating Altitude |
2000 metre above mean sea level |
Storage Altitude |
12000 metre above mean sea level |
IP Rating |
IP 54 per IEC 60529 |
Drop Test |
3 metre |
Temperature Range |
-30 to 650 degree Celsius |
Accuracy |
±1.0 degree Celsius or ±1.0 percent of reading, whichever is greater -10 to 0 degree Celsius: ±2.0 -3 to -10 degree Celsius: ±3.0 |
Response Time (95 percent) |
< 500 ms (95 percent of reading) |
Spectral Response |
8 to 14 microns |
Emissivity |
0.10 to 1.00 |
Optical Resolution |
12:1 (calculated at 90 percent energy) |
Display Resolution |
0.1 degree Celsius |
Repeatability of Readings |
±0.5 percent of reading or <±0.5 degree Celsius, whichever is greater |
Size |
175 x 85 x 75 mm |
Weight |
0.255 kg |
1AC II VoltAlert Voltage Detector Features:
- Voltbeat technology and continuous self-test-so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 volt for added protection
- On and Off button
- Audible and silent mode
1AC II VoltAlert Voltage Detector Specifications:
Battery Type |
AAA Alkaline |
Battery Life |
Typical Battery life of greater than 1 year |
Operating Temperature |
-10 to 50 degree Celsius |
Operating Humidity Range |
0 to 95 percent (0 to 30 degree Celsius) |
0 to 75 percent (30 to 40 degree Celsius) |
0 to 45 percent (40 to 55 degree Celsius) |
Operating Altitude |
3000 metre |
Cleaning |
Clean with Damp Cloth |
Operating Principles |
Senses the steady state electrostatic eld produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
Voltage Sensing Ranges |
Nominally, 90 to 1000 volt AC |
Detector Tip Style |
Flat-Tip |
Light Source |
One High-Intensity Red LED |
Agency Approvals |
c CSA us, CE, C-Tick |
Safety Rating |
1000 volt, CAT IV |
Includes:
- Fluke T6-600 Electrical Tester
- Fluke 62 Max+ Infrared Laser Thermometer
- Fluke 1AC II VoltAlert Voltage Detector
- Soft Case
- User Manual