METCAL CV-5210 240 Volt Connection Validation Soldering Station

€1,048.94 €1,008.60 Inc. VAT

Special Offer
Code E07136


Add to Basket
Product Details

Metcal CV-5210 Connection Validation Soldering Station

Metcal soldering stations have led the way with SmartHeat technology. It senses the thermal load and instantly delivers Power on Demand directly to the joint. The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. This systemic and objective approach provides repeatability and a measurable standard to the soldering process.

The CV-5210 soldering station includes:
• CV Power supply
• CV-H1-AV: Advanced hand-piece with integrated LED light*
• MX-W1AV: TipSaver Workstand*

Features:
  • SmartHeat power on demand technology
  • Patented connection validation IMC formation technology
  • 2.8" colour touchscreen with bold graphics
  • Communications port for process traceability data and firmware graphics
  • Precise tip temperature display
  • Integrated net power meter and power graph
  • Patented chip-in-cartridge technology
  • Closed loop bi-directional communication
  • Stores and records cartridge attributes
  • Provides traceability information
  • Protects power supply from non-conforming cartridges
  • Backwards compatible with MX series power supplies
  • Password protection
Specifications
  • Voltage: 100-240 volt, Grounded Circuit
  • Ambient Operating Temperature: 10 to 40 degree Celsius
  • Maximum Enclosure Temperature: 55 degree Celsius
  • Input Line Frequency: 50/60 Hz
  • Maximum Power Rating: 125 watt
  • Maximum Power Output: 80 watt
  • Output Frequency: 13.56 MHz
  • Heating Method: Induction
  • Display: 2.8" Colour TFT LCD Display
  • Resolution: 320 x 240 RGB
  • Size: 2.8" Diagonal
  • Active Area: 43.20 x 57.60 mm
  • Connections: Single Port
  • Communications: USB
  • Tip-to- Ground Potential: < 2 mV
  • Tip-to-Ground Resistance: < 2 ohms
  • Idle Temperature Stability: ± 1.1 degree Celsius in still air
  • Tip Temperature Accuracy: Meets or Exceeds IPC J-STD-001 Standard
  • Hand-piece Cable Length: 183 cm, burn proof, ESD safe
  • RF Connector: F type Power Connector
  • LED Power Connector: 6 pin DIN
  • Operation Type: 2 Single Port or Dynamic Dual Simultaneous
  • Width: 121 mm
  • Depth: 130 mm
  • Height: 235 mm
  • Weight: 3.35 kg
Delivery Info

Please allow 1 - 2 Business Days for Delivery

Free delivery on all orders over €49.99 + VAT, Click here for more information 

Returns Policy

Easy Returns via Store, Post or Courier

Caulfield Industrial  are happy to accept items returned to us within 28 days of purchase and in this case we offer you an exchange or a full refund once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of Caulfields and may be refunded as a credit against a future purchase. All items must be returned to Caulfields in the same condition in which they were shipped and in a saleable condition. Caulfield Industrial reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.

Click to view complete product details
Close

POP-IN HTML goes here

Close

Your Basket

Your basket is currently empty