Portasol S1K Super Pro Gas Soldering Iron Kit
Portasol Super Pro Gas Soldering Iron comes with Piezo ignition for total user convenience. Switch on and ignition are accomplished in two smooth ergonomic movements. Power adjustment, as is traditional with Portasol gas products, is by rotational control at the end of the tool. Nothing could be easier or more convenient. An equivalent of 125 watts at 580 degree Celsius may be high for delicate soldering requirements, but the peak gas flow gives excellent flame and hot air characteristics and if heavy solder melt tasks are there, this is the tool for the job. The natural state of the Super Pro is in flame mode. For other tasks there is a range of 5 soldering tips, 1 Hot Air Blower Tip (SPT-9), and of course, a Hot Knife Tip (SPT-10) for plastics shaping, rope cutting, and other applications.
Features:
- Safety stand
- User repairable
- Safety cut off switch
- 12 assorted spare tips
- Heats up in to 40 seconds
- 10 seconds refill time
- The soldering iron is supplied with soldering tip 2.4 mm
- The stainless steel enclosed tank on the Super Pro gives 90 minutes operation between refills
- Ignition is achieved with the internal Piezo crystal mechanism and run time is around 2 hours on a 30-second refill
Specifications:
- Maximum Tip Temperature: 580 degree Celsius
- Operating Time: 120 minute
- Gas Type: Lighter Fuel
- Temperature Adjustable: Yes
- Length: 233 mm
- Weight: 0.16 kg
Kit contains:
- 1 x 2.4 Double Flat Tip (SPT-6)
- 1 x 4.8 mm Double Flat Tip (SPT-8)
- 1 x Hot Air Blower Tip (SPT-9)
- 1 x Hot Knife Tip (SPT-10)
- 1 x Deflector (SPT-12)
- 1 x Wire Stand (SPT-15)
- 1 x Cleaning Sponge and Cup (SPT-19)
Consumables
Click here for a Butane refill can.