STIHL LA012000000 HTA 135 Cordless Polesaw -AP System
The most powerful STIHL cordless pole pruner. Low-vibration. For professional use in tree maintenance, orchards and local authorities. For pruning trees, removing dead wood and breakage from storms, and for cutting back fruit trees. 3/8″ P saw chain, lightweight magnesium gearhead, sturdy branch hook for easy removal of loose cuttings from the tree. Particularly rigid-in-guidance professional telescopic shaft with rapid adjustment for precise biting characteristics and a precise cut. Ear defenders required. Mounting point for the STIHL Smart Connector 2 A on the power tool housing. Total length adjustable between 285 – 405 cm.
Exterior design of STIHL guide bars are subject to change. Technical specifications remain the same.
Features:
- Powerful cordless pole pruner for tree maintenance and orchards
- Prepared for use with a Smart Connector 2 A
- Individual tool without battery and without charger
- For professional arborists, fruit farmers and municipal services
- Easy length adjustment thanks to professional telescopic shaft
- Quiet cordless pole pruner for noise-sensitive areas
- IPX4 rated for working in all weather
Specifications:
- Bar length: 30cm
- Bar length: 12"
- Power: 1.1 kW
- Rated voltage: 36V
- Weight: 6.8 kg 1)
- Sound pressure level: 88 dB(A) 2)
- Sound power level: 102 dB(A) 2)
- Vibration level, left: 4.3 m/s² 3)
- Vibration level, right: 5.1 m/s² 3)
- Saw chain pitch: 3/8" P
- Total length (min.): 285 cm 4)
- Total length (max.): 405 cm 5)
- Recommended battery: AP 300 S
- Battery working time with AP 100 battery: up to 10 min 6)
- Battery working time with AP 200 battery: up to 22 min 7)
- Battery working time with AP 500 S battery: 54 min
- IPX Rating: N/A
1)With bar and chain, without cable and chain oil2)K-factor according to DIR 2006/42/EC = 2.5 dB (A)3)K-factor according to DIR 2006/42/EC = 2m / s ²4)Minimum with tool5)Maximum with tool6)Working times are approximate and may vary depending on application7)Working times will vary depending on the application