Uryu Torque Control Angle Nutrunners
UAN-611R and 701R series Reversible Torque Control Angle Nutrunenrs have the following features desired by the users that require high quality and steady production. Instant shut-off with unique ball clutch to minimise operator fatigue. Low inertia and high speed motor for high productivity and minimum torque scatter and low mean shift regardless of hard and soft joint rates. UAN-611R series tools are equipped with Lubrication free rotor blades in the air motor for a clean working environment and low maintenance cost. Same oil free blades are now being developed for UAN-701R series tools as well.
Features:
- High power to weight ratio for higher productivity
- Wide variety of speeds and torque ranges to match your application
- Easily adjusts to forward or reverse rotation with smooth rolling selector
- Torque adjusts from outside of tool with a Phillips screwdriver
- Delivers minimal torque reaction with instant shut-off
- Light weight
- Low noise levels with exhaust located at rear of tool
- Fewer parts and higher reliability than previous models
- Easily lubricate the angle head bevel gears without disassembling the tool with grease cock feature
- ISO 5393 testing reveals a 6-sigma combined capability of less than 20 percent on all models
- Mechanical clutch offers precise torque control regardless of joint rate Provides greater precision, especially on hard joints, with low inertia design
- High power allows for torque repeatability on soft joints and prevailing torque applications
- A Poka Yoke option is available for bolt counting or error proofing (Use in conjunction with UTM-1100 fastener counter)
UAN-611R-60C Specifications:
- Drive Type: 3/8" Square
- Length: 383 mm
- Max Air Consumption: 21.1
- Air Inlet NPT: 1/4"
- Minimum Torque: 6.5 Nm
- Maximum Torque: 12 Nm
- Maximum Air Pressure: 85 psi
- Sound Level: 80 db (A)
- Style: Angle Head
- Trigger Type: Lever Start
- No-Load Speed: 620 rpm
- Screw Capacity: 6 mm
- Weight: 1.6 kg
UAN-611R-30C Specifications:
- Drive Type: 3/8" Square
- Length: 373 mm
- Max Air Consumption: 21.1
- Air Inlet NPT: 1/4"
- Minimum Torque: 13 Nm
- Maximum Torque: 25 Nm
- Maximum Air Pressure: 85 psi
- Sound Level: 80 db (A)
- Style: Angle Head
- Trigger Type: Lever Start
- No-Load Speed: 270 rpm
- Screw Capacity: 8 mm
- Weight: 1.6 kg
UAN-701R-40C Specifications:
- Drive Type: 3/8" Square
- Length: 455 mm
- Max Air Consumption: 31.6
- Air Inlet NPT: 1/4"
- Minimum Torque: 28 Nm
- Maximum Torque: 45 Nm
- Maximum Air Pressure: 85 psi
- Sound Level: 85 db (A)
- Style: Angle Head
- Trigger Type: Lever Start
- No-Load Speed: 400 rpm
- Screw Capacity: 8 - 10 mm
- Weight: 2.4 kg